A high-power air whistle according to IMO for vessels of 200m or more in length.

A high–power whistle according to IMO for vessels up to 75m in length.

A high–power whistle according to IMO for vessels up to 75m in length.

A high–power whistle according to IMO for vessels up to 75m in length.

Approved for each lenght European inland navigation vessels.

Signalling whistle for vessels at sea up to 20 m in length at sea.

Approved for each lenght European inland navigation vessels.

TL-70 for panel or box mounting.

ELECTRO–TYFON® MT 150/130 is an electrically driven piston ship’s whistle. It is built up of comparatively few moving parts as the “swinging piston”, no lubricated cylinder and an oil free gearbox.

ELECTRO–TYFON® MT 150/140 is an electrically driven piston ship’s whistle. It is built up of comparatively few moving parts as the “swinging piston”, no lubricated cylinder and an oil free gearbox.

ELECTRO–TYFON® MTX 150/130 is an electrically driven piston ship’s whistle. It is built up of comparatively few moving parts as the “swinging piston”, no lubricated cylinder and an oil free gearbox.

TL-80 or TL-85 with lamp for panel or box mounting.

SHIPMASTER® is a modular system that can be scaled to the individual customer’s specifications no matter how large or small the project. At the core of the product are numerous standard control functions that can be enhanced by the addition of more advanced tools specific to each application. The flexible design structure of SHIPMASTER® allows us to incorporate such features as optional slave operation or full redundancy compliance. From basic stern ramp indication to deep well pump power pack control we can provide a solution for ship automation.

Signal Controller Ti98 is a signal controller for both whistle and morse light. It is a robust, simple to use and inexpensive unit which can be installed in all types of vessels.

TLG 2000 is a multipurpose sound for foghorn, bell and gong and also light signal controller with a number of important features.

To protect the installation from excessed current a thermal overload relay is built into the contactor unit. The relay´s set point is 13A and is set to automatic reset (A). The function can be changed to manual reset (H), but in this case the overprotection has to be reset by the green pushbutton. In addition the unit provides the ELECTRO-TYFON® with heating voltage that automatically switches off during signaling.

The Solenoid Valve TV 88 can be fitted to all
For installation together with all type of air horns.

The valve can be mounted indoors or encased
outdoors. The best mounting is with the solenoid
upright and vertical. For distinct code signals, the
pipe must not be longer than 6m between the valve
and horn.