• Pre-assembled fire detection control unit for small to medium-size applications
  with up to 512 detectors
• Highest system availability through decentralized signal evaluation in control
  unit and detectors
• Processes the signals from widely varying detection systems, such as:
  – FD20 devices, series SintesoTM
  – interactive and wireless fire detectors, series DS1150
  – addressable AnalogPLUS fire detectors, series DS1130
  – collective detectors, series DS1100
  – addressable and collective fire detectors, legacy series MS9, MS7, MS6
• Built-in operating terminal, up to 15 additional remote (comfort) operating terminals possible
•  Additional indication and operation devices like LED indicators, synoptic panels, text-oriented floor repeater terminals, fire brigade terminals
• Options for further applications like fire control installations, sounders, networking to management system, VdS, extinguishing, pager system etc.
•  Designed for optimum installation and commissioning efficiency
•  Most flexible parameterization possibilities for almost any application
•  Remote access/maintenance possibility

Please contact Venteville to ensure an optimal fire safety solution and maintenance on board your vessel.

Obsolete, contact us for a replacement

• Wide spectrum smoke detector,
  collective

Obsolete, contact us for a replacement

• Wide spectrum detector,
  collective

Obsolete, contact us for a replacement

• Wide spectrum detector,
  collective

• Detector base with stilts for fire detectors with collective signal processing
•  ‘Gray’ connection terminals, 0.2…1.5 mm2 conductor cross-section
•  FDB201-AA also contains micro terminal DBZ1190-AA

• Detector base with stilts for fire detectors with addressable signal processing
• Orange’ connection terminals, 0.2…1.5 mm2 conductor cross-section
• FDB221-AA also contains micro terminal DBZ1190-AA

• Flat detector base for fire detectors with collective signal processing
• ‘Gray’ connection terminals, 0.2…1.5 mm2 conductor cross-section

● For adapting AnalogPLUS and SIGMALOOP for Sinteso detector systems

● Can be set with jumper on replaced detector

• For adapting Interactive for Sinteso detector systems
• Can be set with jumper on replaced detector

• For routing surface-mounted cables larger than Ø 6 mm
• Detector base is secured with a snap fastener

• For achieving a higher protection category
• For mounting in wet or humid environments
• Required when using detector heating unit FDBH291
•  Required when using protective cage DBZ1194 or EMC-protective cage FDBZ294
• Mounted between detector base and ceiling
• Detector base mounted quickly: The detector base simply clicks into place in
  base attachment humid FDB293.

• Base attachment wet with additional integrated rubber seal for mounting in wet
  or humid environments
• For achieving a higher protection category
• For mounting in wet or humid environments
• Required when using detector heating unit FDBH291
• Required when using protective cage DBZ1194
• Mounted between detector base and ceiling
• Detector base mounted quickly: The detector base simply clicks into place in
  base attachment wet FDB295.

• For adapting AlgoRex (collective) and SIGMACON for Sinteso detector
  systems

Multi-sensor fire detector Sinteso (A+)

Multi-sensor fire detector Sinteso ASA