Integrated Fire Detection System Solutions
When it comes to fire safety, Siemens and Marinelec offers a comprehensive, integrated solution. It protects every element on board your vessel, combining an extensive product portfolio with expert consulting services.
Fire Detection Systems – Products
Device Compatibility
The addressable detectors, manual call points, and loop-powered sounders are fully compatible with the Marinelec Phoenix V2 fire detection system.
These devices include:
Detectors and Bases |
|
| Partnumber | Description |
| TOADR | Optical smoke detector. |
| TTADR | Heat detector. Available in 50°C, 65°C, 80°C |
| TMCADR | Multisensor detector. |
| TFUVADRW | Flame detector delivered with base and mounting bracket. |
| EMADR | Base for addressable detector. |
| KITSEAP | Watertight kit for TOADR, TTADR, TMCADR. |
| TTEXADR | Intrinsically safe heat detector. |
| EMEXADR | Base for intrinsically safe detector. |
| TOEXADR | Intrinsically safe optical smoke detector. |
Manual Call Points |
|
| Partnumber | Description |
| DMADRIS | Manual call point with isolator IP24D. |
| DMADREIW1 | Waterproof manual call point with isolator IP67. |
| DMEXADRE | Intrinsically safe manual call point IP67. |
Sirens and Beacons |
|
| Partnumber | Description |
| SDIR24_1CDE | Multi-tone red siren, 24VDC, 100dB, IP65, MED. |
| FSDIR24_10CDE | Multi-tone red sounder/beacon 24 VDC , 1J, 100dB, IP65, MED |
Phoenix V2: Addressable Fire Detection and Alarm Control Panel
The Phoenix V2 offers a versatile solution for fire detection, supporting up to 126 devices per loop with the Apollo protocol. It integrates seamlessly with a range of devices, providing flexibility for various system configurations.
The system allows users to allocate any number of devices to any zone, making customization easy for specific needs. For a smooth installation, planning is crucial. Each device needs a unique address and a label with up to 40 characters to indicate its location. Devices should also be grouped into zones based on fire detection design standards. Users can configure the control panel effortlessly with Phoenix Soft V2 for optimal performance.
Learn more on the Phoenix V2 product page.
Contact Us for More Information
If you have any questions or require spare parts for your Marinelec system.
Discover the PHOENIX V2 Fire Detection System.
Contact Us for More Information
If you have any questions or require spare parts for your Marinelec system.
Device Compatibility
The Conventional detectors, manual call points, and loop-powered sounders are fully compatible with the Marinelec Philae fire detection system.
These devices include:
Detectors and Bases |
|
| Partnumber | Description |
| TOA | Optical smoke detector. |
| TTA | Heat detector. Available in 50°C, 65°C, 80°C |
| TMCA | Multisensor detector. |
| TFUVAW | Flame detector delivered with base and mounting bracket. |
| EMBCAO | Base for addressable detector. |
| KITSEAP | Watertight kit for TOADR, TTADR, TMCADR. |
| TTD | Heat detector. |
| EMBCD | Base for TTD and TOD detector. |
| TOD | Optical smoke detector. |
| KITSED | Watertight kit for TTD and TOD. |
| TOEXA | Intrinsically safe optical smoke detector. |
| TTEXA | Intrinsically safe heat detector. |
| EMEXA | Base for intrinsically safe detector. |
| TMEXA | Intrinsically safe multisensor detector. |
| EMBCEXA | Base for intrinsically safe detector. |
Manual Call Points |
|
| Partnumber | Description |
| DMA | Manual call point with isolator IP24D. |
| DME | Waterproof manual call point IP67. |
| DMEXAE | Intrinsically safe manual call point IP67. |
| DMD | Indoor manual call point IP33. |
| DMED | Waterproof manual call point IP66 |
Sirens and Beacons |
|
| Partnumber | Description |
| SDIR24_1CDE | Multi-tone red siren, 24VDC, 100dB, IP65, MED. |
| FSDIR24_10CDE | Multi-tone red sounder/beacon 24 VDC , 1J, 100dB, IP65, MED |
PHILAE Conventional Fire Detection System
The PHILAE is a versatile conventional fire detection system that supports 4 to 28 zones. It has a total capacity for up to 512 detectors or manual call points, providing extensive coverage for fire safety.
The system’s modular design allows the connection of up to three PHILAE_EM extension modules, each offering 8 additional zones, expanding the capacity to a maximum of 28 zones. Each zone can accommodate up to 32 devices, such as manual call points, optical smoke, heat, and flame detectors, including intrinsically safe options.
Additionally, the PHILAE system supports up to three repeaters, such as PHILAE_RP, which can log events for locations like the Engine Control Room or Fire Control Room, ensuring comprehensive monitoring.
Learn more on the Philae product page.
Contact Us for More Information
If you have any questions or require spare parts for your Marinelec system.
Discover the PHILAE Fire Detection System.
Contact Us for More Information
If you have any questions or require spare parts for your Marinelec system.
FC2020 Fire Control Panel
The FC2020 fire control panel is a compact and scalable system designed to process up to 252 addresses from Sinteso™ devices. With two loops, expandable to four, it serves both stand-alone applications and networked systems. Ideal for small to medium-sized installations like workshops and hotels, the FC2020 also integrates seamlessly into larger setups when networked.
The system can be programmed using SintesoWorks, a user-friendly tool that offers flexibility and customization. Up to 32 fire control panels and terminals can connect in a single cluster through the FCnet/SAFEDLINK network. This can further expand to 14 clusters with up to 16 panels each using a fiber-optic backbone (FCnet/LAN), allowing EN 54-compliant networks of up to 64 fire control panels. Additionally, the panel connects with the Siemens Danger Management System, ensuring streamlined monitoring.
Automatic detection and read-in of all FDnet devices simplify the setup, while up to 2,000 events can be stored and retrieved for analysis. Remote access through SintesoView offers convenient data uploads.
Sinteso: A Scalable, Reliable Fire Detection System
Sinteso™ provides an advanced fire detection solution with unmatched scalability and reliability. Its ASAtechnology™ (Advanced Signal Analysis) allows real-time interpretation of sensor data, ensuring sensitive detection of fires and strong resistance to false alarms.
ASAtechnology enables detectors to adjust dynamically based on environmental conditions, offering optimal performance. By selecting the correct ASA parameter set, the system reacts accurately to genuine fires while ignoring deceptive signals. This guarantees maximum reliability in fire detection, particularly in complex environments.
Key Features of FC2020 and Sinteso Systems:
- Genuine Alarm Guarantee: Minimizes false alarms for better safety.
- Flexible Networking: Supports FCnet and FDnet for scalability and integration.
- Comprehensive Fire Safety: Adapts to systems of any size or complexity.
- Seamless Integration: Connects with building services through BACnet/IP and Ethernet for efficient management.
Together, the FC2020 and Sinteso provide an innovative, reliable fire safety solution for any infrastructure.
Contact Us for More Information
If you have any questions or require spare parts for your Siemens system.
The FC2020 Sinteso Fire Control Panel, serves as a replacement for the CI1145.
- Detector base with stilts for fire detectors with collective signal processing
- ‘Gray’ connection terminals, 0.2…1.5 mm2 conductor cross-section
- FDB201-AA also contains micro terminal DBZ1190-AA
Function and use
- Flat detector base for fire detectors with collective signal processing
- ‘Gray’ connection terminals, 0.2…1.5 mm2 conductor cross-section
- For flush mounting; only for recess-mounted cable entry
- Detector base with stilts for fire detectors with addressable signal processing
- Orange’ connection terminals, 0.2…1.5 mm2 conductor cross-section
- FDB221-AA also contains micro terminal DBZ1190-AA
- Flat detector base for fire detectors with collective signal processing
- ‘Gray’ connection terminals, 0.2…1.5 mm2 conductor cross-section
● FDB241 Base Adaptor for adapting AnalogPLUS and SIGMALOOP for Sinteso detector systems
● Can be set with jumper on replaced detector
- FDB251 Base adaptor for adapting Interactive for Sinteso detector systems
- Can be set with jumper on replaced detector
- FDB291 Base attachment for routing surface-mounted cables larger than Ø 6 mm
- Detector base is secured with a snap fastener
FDB293 Base Attachment – Ideal for Humid Environments
The FDB293 base attachment is specifically developed for use in wet or humid environments where standard mounting solutions may fall short. By offering a higher protection category, it ensures the long-term reliability and safety of your fire detection system, even under challenging environmental conditions.
Enhanced Protection and Compatibility
This base attachment is installed between the detector base and the ceiling, forming a sealed barrier that protects internal components against moisture. Therefore, it is an essential accessory when you want to extend the life of your detectors in damp or aggressive environments.
Moreover, the FDB293 is required in several installation scenarios. For instance, it must be used when installing the detector heating unit FDBH291, which prevents condensation build-up. Additionally, it is necessary when fitting the protective cage DBZ1194 or the EMC-protective cage FDBZ294, both of which shield the detector from mechanical or electromagnetic interference.
Quick and Simple Installation
Installation of the FDB293 is both efficient and user-friendly. The detector base easily clicks into place without the need for extra tools or complex procedures. This design not only saves time during setup but also ensures a reliable and stable mounting every time.
Why Choose the FDB293?
-
Protects detectors in wet, humid, or industrial environments
-
Required for use with heater units and protective cages
-
Offers high durability and resistance to moisture
-
Enables quick and secure installation with snap-in design
-
Extends detector lifespan and maintains system reliability
For professional guidance or tailored solutions, contact our experts today. We’re ready to help you get the best protection in every environment.
Contact us.
Summerized:
- For achieving a higher protection category
- For mounting in wet or humid environments
- Required when using detector heating unit FDBH291
- Required when using protective cage DBZ1194 or EMC-protective cage FDBZ294
- Mounted between detector base and ceiling
- Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
- FDB295 Base attachment with additional integrated rubber seal for mounting in wet
or humid environments - For achieving a higher protection category
- For mounting in wet or humid environments
- Required when using detector heating unit FDBH291
- Required when using protective cage DBZ1194
- Mounted between detector base and ceiling
- Detector base mounted quickly: The detector base simply clicks into place in
base attachment wet FDB295.
- FDB299 Base adaptor for adapting AlgoRex (collective) and SIGMACON for Sinteso detector
systems
FDOOT Multisensor Fire Detectors Series
The FDOOT series offers advanced multisensor fire detectors featuring ASAtechnology™ (Advanced Signal Analysis). These detectors are ideal for gradual modernization of various fire detection systems, such as Collective/GMT/SynoLINE300, AlgoRex AnalogPLUS, Interactive, SIGMALOOP, or MS8, on Sinteso FDnet. FDOOT241-A3
Key Features
- Advanced Signal Processing: Utilizes ASAtechnology for event-controlled detection, providing early and reliable fire detection with strong immunity to deceptive phenomena.
- Flexible Modernization: Supports systems like AlgoRex and SIGMALOOP on Sinteso FDnet, allowing gradual upgrades.
- Redundant Sensor Design: Maximum system availability is ensured with sensor redundancy, making the system more reliable.
- Wind Resistance: Performs efficiently in wind speeds ranging from 1 to 20 m/s.
- Eco-Friendly Materials: The detectors are built with ecological materials, contributing to environmental sustainability.
The detector includes a point detector with additional heat sensors and a dust cap for protection during construction.
Functionality
The FDOOT series operates on the scattered light principle, using two sensors for optical forward and backward scattering. The opto-electronic measuring chamber blocks disruptive external light while detecting light and dark smoke particles. Additional heat sensors enhance immunity to false alarms. It can be configured as a smoke detector, heat detector, or multi-sensor detector via software. Selectable detection behavior allows adaptation to specific applications through ASA parameter sets.
Multi-Protocol Compatibility
- FDOOT241-A3: Compatible with AlgoRex AnalogPLUS and FDnet.
- FDOOT241-A4: Compatible with SIGMALOOP and FDnet.
- FDOOT241-A5: Compatible with AlgoRex Interactive and FDnet.
- FDOOT241-A9: Compatible with Collective/GMT/SynoLINE300 on FDnet.
- FDOOT241-8: Compatible with MS8/PMT on FDnet.
Applications
These detectors provide early detection of both flaming and smoldering fires in environments with deceptive phenomena. They support gradual modernization for older systems like AlgoRex AnalogPLUS, SIGMALOOP, and others, offering a reliable upgrade path.
Contact Us for More Information
If you have any questions or require spare parts for your Siemens system.
The FDOOT241-A5 Multisensor Detector, combined with the FDB241 adaptor, serves as a replacement for the model:
DO1131
FDOOT Multisensor Fire Detectors Series
The FDOOT series offers advanced multisensor fire detectors featuring ASAtechnology™ (Advanced Signal Analysis). These detectors are ideal for gradual modernization of various fire detection systems, such as Collective/GMT/SynoLINE300, AlgoRex AnalogPLUS, Interactive, SIGMALOOP, or MS8, on Sinteso FDnet. FDOOT241-A5
Key Features
- Advanced Signal Processing: Utilizes ASAtechnology for event-controlled detection, providing early and reliable fire detection with strong immunity to deceptive phenomena.
- Flexible Modernization: Supports systems like AlgoRex and SIGMALOOP on Sinteso FDnet, allowing gradual upgrades.
- Redundant Sensor Design: Maximum system availability is ensured with sensor redundancy, making the system more reliable.
- Wind Resistance: Performs efficiently in wind speeds ranging from 1 to 20 m/s.
- Eco-Friendly Materials: The detectors are built with ecological materials, contributing to environmental sustainability.
The detector includes a point detector with additional heat sensors and a dust cap for protection during construction.
Functionality
The FDOOT series operates on the scattered light principle, using two sensors for optical forward and backward scattering. The opto-electronic measuring chamber blocks disruptive external light while detecting light and dark smoke particles. Additional heat sensors enhance immunity to false alarms. It can be configured as a smoke detector, heat detector, or multi-sensor detector via software. Selectable detection behavior allows adaptation to specific applications through ASA parameter sets.
Multi-Protocol Compatibility
- FDOOT241-A3: Compatible with AlgoRex AnalogPLUS and FDnet.
- FDOOT241-A4: Compatible with SIGMALOOP and FDnet.
- FDOOT241-A5: Compatible with AlgoRex Interactive and FDnet.
- FDOOT241-A9: Compatible with Collective/GMT/SynoLINE300 on FDnet.
- FDOOT241-8: Compatible with MS8/PMT on FDnet.
Applications
These detectors provide early detection of both flaming and smoldering fires in environments with deceptive phenomena. They support gradual modernization for older systems like AlgoRex AnalogPLUS, SIGMALOOP, and others, offering a reliable upgrade path.
Contact Us for More Information
If you have any questions or require spare parts for your Siemens system.
The FDOOT241-A5 Multisensor Detector, combined with the FDB251 adaptor, serves as a replacement for the model:
DO1151
Siemens: Integrated Fire Detection System Solutions
When it comes to fire safety, Siemens Cerberus™ PRO offers a comprehensive, integrated solution. It protects every element on board your vessel, combining an extensive product portfolio with expert consulting services. Siemens ensures optimal fire safety through its application know-how and reliable systems.
Marinelec Technologies: Specialists in Maritime Safety
Marinelec Technologies excels in designing and manufacturing electronic safety systems for all types of vessels. Their product range includes:
- Fire detection systems
- General alarm systems
- Monitoring and alarm systems
- Custom products upon request
Expertise in Regulatory Compliance
With deep expertise in the maritime sector, Marinelec integrates the latest technologies to meet both client needs and regulatory standards. They specialize in solutions supervised by classification societies like Bureau Veritas, Det Norske Veritas, and Germanischer Lloyd’s. Marinelec customizes systems for various vessel types, ensuring compliance with maritime regulations.
Contact Us for More Information
If you have any questions or require spare parts for your Siemens or Marinelec system.
